求助，ML2.1 rc3用smart 后未能进入X（关闭）

ajqn3d

关闭因最早下载的正式版有错误，本人试着用了smart智能包管理升级，结果重启后无法进入X，
部分错误提示如下：
GLX：Could not loat software renderer
Could not init font path element Unix/:7100,removing from list.
expected keysym,got XF86info:line 914 of inet
expected keysym,got XF86info:line 914 of inet

不想重装，重装很简单，但意义不大！麻烦指点一下如何解决，3Q~

[ 本帖最后由 ajqn3d 于 2008-12-20 23:54 编辑 ]

sejishikong

升级了几个包？
这个提示前后应该还有。

ajqn3d

Module Loader present
Markers: (--) probed,(**)from config file, (==)defauld setting
(++)from command Line,(!!)notice (11)informational,
(ww)warning,(EE)error,(NI)not implemented,(??)unknown
(==)log file:"/var/log/Xorg.0.log",Time: Thu Dec 18 19:55:47 2008
(==)using config file:"/etc/X11/xorg.comf"
(EE)Failed to load module "record" (mould does not exist,0)
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:0:0)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:1:0)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:2:0)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:2:5)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:2:6)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:2:7)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:3:0)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:3:1)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:3:2)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:3:3)found
(ww)SIS: No matching Device Section for instance(BUSID PCI:0@0:4:0)found
(EE) ALGLX error:dlopen of /usr/X11R6/lib/moudules/dri/swrast_dri.so failed(/usr/X11R6/lib/moudules/dri/swrast_dri.so:ca)

nnot open shared object file:No such fileor directory)
GLX：Could not loat software renderer
Could not init font path element Unix/:7100,removing from list.
expected keysym,got XF86info:line 914 of inet
expected keysym,got XF86info:line 914 of inet

另附上xorg.conf内容：
# Xorg configuration created by system-config-display


Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"

inputDevice    "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF"
        FontPath     "/usr/share/fonts/default/Type1"
        FontPath     "/usr/share/fonts/pcf/zh_CN"
        FontPath     "/usr/share/fonts/msttcorefonts"
        FontPath     "/usr/share/fonts/ttf/zh_CN"

EndSection
Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "dri"
        Load  "v4l"
        Load  "xtrap"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
          Option            "XbkModel" "pc105"
        Option            "XkbLayout" "us"
EndSection
Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5 6 7"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    ""
        HorizSync    0.0 - 0.0
        VertRefresh  0.0 - 0.0
EndSection
Section "Device"
        Identifier  "Videocard0"
        Driver      "sis"
        VendorName  "Videocard vendor"
        BoardName   "Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
        VideoRam    32768
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     16
        SubSection "Display"

                Depth     16
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

Section "Extensions"
        Option            "Composite" "Enable"
EndSection

[ 本帖最后由 ajqn3d 于 2008-12-19 20:17 编辑 ]

sejishikong

你看下xorg.conf中显卡的driver是什么？
你的显卡是sis的？

ajqn3d

不好意思，忘记说明，我的是华硕A9T的笔记本，集成SIS M661FX/M661MX 显卡

[ 本帖最后由 ajqn3d 于 2008-12-19 20:16 编辑 ]

jiangtao9999

sis 的显卡比 intel 的 740 810 还垃圾……

ajqn3d

我用硬盘安装ML2.0/ML2.1RC3都成功了，只是RC3 用SMART后才出的问题，也不知道升级了几个包，实在不行就重装，我已下载好正式版！主要是想学习一下如何解决问题！

panpanpdj

要是用SMART全部升级的话就重装得了，这样是不好说具体哪个地方出错的，一般正常的系统用smart全部升级过后也会出问题的

ajqn3d

看样子我真的要重装了，明天正好周末！再没有好消息，我就再做一次体力活！

另外去把原来的那台老爷机再整整来折腾！搞个局域网来玩，年前公司生意不景气，假期越来越多，越来越长了！

jozhu

其实，你只要把SIS换成VESA就解决了。。。

ajqn3d

系统已重装，现在OK！谢谢各位！

[ 本帖最后由 ajqn3d 于 2008-12-20 23:58 编辑 ]