QQ登录

只需一步，快速开始

 找回密码
 注册

QQ登录

只需一步，快速开始

12
返回列表 发新帖
楼主: zhtaoist

已经装上了，不过……

[复制链接]
 楼主| 发表于 2004-8-30 15:49:07 | 显示全部楼层
[quote:58dbb36b2e="KanKer"]你把Option "Device" "/dev/input/mouse0"
改为Option "Device" "/dev/input/mice"试试。[/quote]

Magiclinux里的是Option "Device" "/dev/psaux"

turbo10里的是Option "Device" "/dev/input/mouse0"

昨天我把magic里的这段改成turbo10里的，还是不行
回复

使用道具 举报

2001xk
发表于 2004-8-30 16:18:00 | 显示全部楼层
用kdeuse新建个用户能不能登陆KDE呢？
回复

使用道具 举报

 楼主| 发表于 2004-8-31 14:13:33 | 显示全部楼层
[quote:54b298535c="KanKer"]你把Option "Device" "/dev/input/mouse0"
改为Option "Device" "/dev/input/mice"试试。[/quote]

我在另一个linux下把magiclinux的改成：
Option "Device" "/dev/input/mice"
然后重启进magiclinux，鼠标居然能动了
感谢KanKer让我看到了希望

不过刚准备发文庆祝，就死机了（大概进系统后只有一两分钟）

再次重启进入Magiclinux，鼠标又像以前一样不能动了   
回复

使用道具 举报

发表于 2004-8-31 17:54:12 | 显示全部楼层
……………………………………………………

可怜人啊～～～～～
回复

使用道具 举报

 楼主| 发表于 2004-8-31 18:07:35 | 显示全部楼层
帮帮偶吧
回复

使用道具 举报

发表于 2004-8-31 22:36:35 | 显示全部楼层
还是换硬件吧
回复

使用道具 举报

 楼主| 发表于 2004-8-31 23:01:00 | 显示全部楼层
[quote:eba1fde784="阿萨德非改行"]还是换硬件吧[/quote]

不是吧，我觉得不是硬件的问题

windows用的好好的，turbo用的好好的，knoppix用的好好的

1.1final下也没问题，为什么要换硬件？
回复

使用道具 举报

hoooh
发表于 2004-9-1 12:23:43 | 显示全部楼层
我的是安装过程就检测不到鼠标,然后安装过程也进行不下去了
怎么办
回复

使用道具 举报

zbalt
发表于 2004-9-8 11:35:50 | 显示全部楼层
/dev/psmouse
回复

使用道具 举报

gump
发表于 2004-9-9 09:41:59 | 显示全部楼层

这个方法不行

[quote:6eaf2621f5="zbalt"]/dev/psmouse[/quote]
这个方法行不通。在兄台的诱惑下，干掉1.1F又试了一次1.2B2。但问题依旧，我将记录放在后面，请各位虾们指导。我的不是用的VM。不一定都要用VM吧
回复

使用道具 举报

gump
发表于 2004-9-9 09:44:42 | 显示全部楼层

我的鼠标不行，这是我的XFree86.0.log

XFree86 Version 4.4.0 (Magic Linux release: 4.4.0-5mgc)
Release Date: 30 March 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.7 i686 [ELF]
Current Operating System: Linux GumpYang 2.6.8.1 #3 Fri Aug 27 22:16:22 CST 2004 i686
Build Date: 14 August 2004
Changelog Date: 05 April 2004
Build Host: zrd

Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.8.1 (root@MagicLinux) (gcc version 3.3.3 20040216 (Magic Linux 3.3.3-2)) #3 Fri Aug 27 22:16:22 CST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep  9 09:16:42 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/TTF,/usr/share/fonts/ttf/zh_CN,/usr/share/fonts/default/Type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 1043,8088 rev 11 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1043,8089 rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0110 card 107d,2850 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:0b:0: chip 1106,3106 card 1186,1403 rev 86 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xee000000 - 0xefdfffff (0x1e00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xeff00000 - 0xf7ffffff (0x8100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xefe00000 - 0xefefffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 MX/MX 400] rev 178, Mem @ 0xee000000/24, 0xf0000000/27, BIOS @ 0xefff0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[1] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[2] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[3] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[4] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[6] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[9] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[1] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[2] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[3] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[4] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[6] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[9] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[6] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[7] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
compiled for 4.4.0, module version = 2.1.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500,
GeForce FX 5100, GeForce FX Go5200 32M/64M, 0x0329,
Quadro NVS 280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, Quadro FX 700, 0x0334,
Quadro FX 3000, GeForce FX 5700 Ultra, GeForce FX 5700,
GeForce FX 5700LE, GeForce FX 5700VE, 0x0345, GeForce FX Go5700,
GeForce FX Go5700, 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100,
0x034F, 0x0040, 0x0041, 0x0042, 0x0043, 0x004E
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce2 MX/MX 400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[6] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[7] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[15] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[6] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[7] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[18] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce2 MX/MX 400"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xF0000000
(--) NV(0): MMIO registers at 0xEE000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM  Model: 25  Serial#: 1095840053
(II) NV(0): Year: 2002  Week: 26
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 28  vert.: 21
(II) NV(0): Gamma: 1.80
(II) NV(0): DPMS capabilities: Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.632 redY: 0.335   greenX: 0.295 greenY: 0.593
(II) NV(0): blueX: 0.143 blueY: 0.067   whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) NV(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) NV(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) NV(0): #3: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) NV(0): #4: hsize: 1152  vsize 864  refresh: 60  vid: 16497
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 56.2 MHz   Image Size:  267 x 200 mm
(II) NV(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
(II) NV(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
(II) NV(0): Ranges: V min: 50  V max: 120 Hz, H min: 30  H max: 55 kHz, PixClock max 70 MHz
(II) NV(0): Monitor name: SyncMaster
(II) NV(0): Serial No: HVBT639776
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Unable to detect which CRTCNumber...
(==) NV(0): ...Defaulting to CRTCNumber 0
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 65536 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor0: Using hsync range of 30.00-55.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1600x1024" (hsync out of range)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (hsync out of range)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (width too large for virtual size)
(II) NV(0): Not using default mode "832x624" (width too large for virtual size)
(--) NV(0): Virtual size is 800x600 (pitch 800)
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(++) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[1] 0 0 0xee000000 - 0xeeffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xed000000 - 0xed0000ff (0x100) MX[B]
[8] -1 0 0x10000000 - 0x100003ff (0x400) MX[B]
[9] -1 0 0xed800000 - 0xed8003ff (0x400) MX[B]
[10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[11] -1 0 0xefff0000 - 0xefffffff (0x10000) MX[B](B)
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[25] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) NV(0): Failed to set up write-combining range (0xf0000000,0x4000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
  32 128x128 slots
  32 256x256 slots
  16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
Symbol xf86Info from module /usr/X11R6/lib/modules/input/mouse_drv.o is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse0: Device: "/dev/psmouse"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psmouse"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo, removing from list!
SetClientVersion: 0 8
回复

使用道具 举报

gump
发表于 2004-9-9 09:46:40 | 显示全部楼层

这是我的XF86Config

# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen      0   "Screen0" 0 0
        InputDevice     "Mouse0" "CorePointer"
        InputDevice     "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath         "/usr/X11R6/lib/X11/rgb"
        FontPath        "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath        "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath        "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath        "/usr/X11R6/lib/X11/fonts/misc"
        FontPath        "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath        "/usr/X11R6/lib/X11/fonts/Speedo"
        FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic"
        FontPath        "/usr/X11R6/lib/X11/fonts/TTF"
        FontPath        "/usr/share/fonts/ttf/zh_CN"   
        FontPath        "/usr/share/fonts/default/Type1"

EndSection

Section "Module"
        Load    "dbe"
        Load    "extmod"
        Load    "fbdevhw"
        Load    "glx"
        Load    "record"
        Load    "freetype"
        Load    "type1"
EndSection

Section "InputDevice"
        Identifier      "Keyboard0"
        Driver          "keyboard"
        Option          "XkbRules" "xfree86"
        Option          "XbkModel" "pc105"
        Option          "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier        "Mouse0"
        # Modified by mouseconfig
        Driver                "mouse"
        Option                "Device"                "/dev/psmouse"
        Option                "Protocol"                "PS/2"
        Option                "Emulate3Buttons"        "yes"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier      "DevInputMice"
        Driver          "mouse"
        Option          "Protocol" "PS/2"
        Option          "Device" "/dev/psmouse"
        Option          "ZAxisMapping" "4 5"
        Option          "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier      "Monitor0"
        VendorName      "Monitor Vendor"
        ModelName       "SyncMaster"
        HorizSync       30.0 - 55.0
        VertRefresh     50.0 - 120.0
EndSection

Section "Device"
        Identifier      "Videocard0"
        Driver          "nv"
        VendorName      "Videocard vendor"
        BoardName       "NVIDIA GeForce 2 MX (generic)"
        VideoRam        65536
EndSection

Section "Screen"
        Identifier      "Screen0"
        Device          "Videocard0"
        Monitor         "Monitor0"
        DefaultDepth    24
SubSection "Display15"
  Depth 15
  Modes "800x600"
EndSubSection
SubSection "Display16"
  Depth 16
  Modes "800x600"
EndSubSection
SubSection "Display24"
  Depth 24
  Modes "800x600"
EndSubSection
EndSection
回复

使用道具 举报

 楼主| 发表于 2004-9-9 10:59:35 | 显示全部楼层

Re: 这个方法不行

[quote:1c3e1aa489="gump"][quote:1c3e1aa489="zbalt"]/dev/psmouse[/quote]
这个方法行不通。在兄台的诱惑下，干掉1.1F又试了一次1.2B2。但问题依旧，我将记录放在后面，请各位虾们指导。我的不是用的VM。不一定都要用VM吧[/quote]

还好没试
回复

使用道具 举报

12
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-26 14:41 , Processed in 0.088670 second(s), 13 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表